Leaking branch located and cappedSchool classroom · West Yorkshire

School leak detection beneath a classroom floor

A hissing classroom and saturated ground led to a leaking desk-tap supply. The school chose to cap the branch rather than excavate.

Acoustic listening unit, headphones and microphone used during the school investigation
ADI’s photograph of acoustic equipment used during the classroom investigation.

Water leak warning signs

The meter recorded a litre every five seconds. The field near the affected classroom was wet.

Leak detection methods used

Closing the branch valve stopped the hissing and reduced consumption. Tracer gas and acoustic equipment traced the leak to pipework feeding the teacher’s desk tap.

Where the water leak was found

The leaking pipe was buried beneath the classroom’s concrete floor.

Leak repairs and next steps

With the customer’s agreement, ADI capped that supply. A 30-minute pressure test held at 3 bar. The desk tap was taken out of service.

For your facilities team

Discuss whether an affected outlet is still needed. Isolating a redundant branch can sometimes avoid opening a finished floor.

More commercial leak detection case studies

Arrange a commercial leak investigation

Tell the office about the building, the signs of a leak and the postcode. ADI will discuss access, any restrictions on water shut-offs, the survey cost and current availability.

0333 567 2629
  • Monday to Friday, 7:30am to 6:30pm
  • Calls reach ADI Leak Detection's office in High Wycombe. Engineers cover England, Scotland and Wales.